10 HSS mini spiral drill bits with high-quality diamond coating - high concentricity through 2.35-mm shaft. As a result, these drill bits are particularly suitable for drilling precise holes in hard materials such as thin glass or stone, and for very clean holes in epoxy printed circuit boards. Scope of delivery: 2x 0.8/1.0/1.2/1.4/1.5 mm in plastic case

€39.99*

100 Building Blocks

Ideal for getting aquainted Mixed for crèche projects. Product handmade in Germany. Including 60 rectangular (l/w/h = 20 x 10 x 10 mm), 25 square, and 15 rounded blocks. Combine these blocks with wood. Additional information suitable for figures 18 cm tall

€21.99*

12 in 1 Solar Hydraulic Robot

The quick-change artist is driven by two energy sources: solar energy and hydraulics. Batteries are therefore superfluous! From 231 components, 12 models can be created based on a gear unit. The Tyrannosaurus-Rex is the largest model with 37cm. Other construction options: buggy, rover, forklift and excavator or scorpion, monkey, ostrich, crocodile, elephant, pterosaurus - and your own creativity!

€39.99*

14 in 1 Solar Robot

The world of robots fascinates all ages! With over 200 parts, the little Roll-e is a real quick-change artist. It is amazing how much power each solar cell-driven version can develop. A solar robot, which proves its versatility in 14 different versions. The solar panel provides the motive energy. Batteries are not needed. The Roll-e kit is divided into two skill levels. Within each level, seven different robot versions can successively be built. Features This learner's kit is ideal for schools, etc. With comprehensive, multi-language instructions. Dimensions approx. 15 x 11 x 11 cm.

€34.99*

18-Note Swiss Music Movements

Fitted into an acrylic glass case with gold-coloured rim. For many different applications, i.e., music boxes, toys, etc. Additional information A mechanical, sliding contact switches the movement on and off. Dimensions Outer Ø 70 mm, case Ø 67 mm, case height 31 mm, total height 40 mm.

€99.99*

18-Note Swiss Music Movements

€99.99*

18-Note Swiss Music Movements

€99.99*

2-component adhesive Uhu-Plus-Sofortfest

Article name: Uhu-Plus-Sofortfest

2-component adhesive (binder and hardener), epoxy-based, for hard materials, such as glass, porcelain, etc. Workable for 2 minutes, cures within 5 minutes, dries transparent.

€17.99*

2-component watch glass glue

Article name: Watch glass glue

For firm gluing of watch glasses, gemstones, and others. The 2-component watch glass glue is ideal for bonds that must meet the highest standards. The adhesive is resistant to chemicals, such as dilute acids and alkalis, petrol, many solvents, and moisture. Benefits of the 2C glue: It dries clear and distinguishes itself - in comparison with fast-curing 2-component epoxy resins - by proper processing with very high resistance to yellowing (with minimal intrinsic colour). Suitable for bonding glass, ceramics, wood, stone, concrete, marble, metals, thermosets, many hard plastics, glass fibre reinforced plastics, and Styrofoam®. Not suitable for soft plastics, PE, PP, rubber, nylon, and for bonds that are subject to bending stress. Because of its low viscosity, the 2-component watch glass glue is only suitable for bonding in which the adhesive composition cannot flow away during curing. Contents: 100g resin C and 40 g hardener V20L

€25.99*

2-in-1 LED work lamp with hook, magnet and base

Super bright, super practical: You get a lantern with 200 lumens and a flashlight with 30 lumens in one device. Ideal for workshops, cars, emergencies, garages, camping and much more. ADVANTAGES: • COB LED with 200 lumen work light plus 30 lumen high power LED flashlight • Easy to use: just press the on/off button to turn the bright and natural light on and off • Versatile in use: many attachment options with hooks, bases and magnets • Powered by 3 AA batteries (please order directly, our reference 331226) • Total freedom: The lamp can be conveniently adjusted and aligned individually, allowing you to work hands-free • Robust design • Wireless • Three watts • 200 lumens • Dimensions: 230 x 60 x 50mm • Weight: Only 170g light

€19.99*

200-part-kit BMW R90S, transparent working model

Build your own classic, working BMW flat-twin modell from 1973 The BMW R 90 S was one of the world's fastest production motorcycles in the 1970s - and is still considered a legend. It was an absolute top model of BMW's famous "Dash Six" series. Experience now with this kit a transparent functional model of the two-cylinder boxer engine of the popular Superbike, which still attracts countless fans worldwide today. A special highlight of the kit is the detailed and switchable 5-speed gearbox. An absolute technique fun! •200-part-kit •transparent working model •shiftable five-speed gearbox •original motorsound •manual 200 parts, construction time approx. 3 to 4 hours, dimensions 1: 2. (Model dimensions 340 x 255 x 310mm). Additionally required: 3 x 1.5 V batteries (AA), order now too! This is not a toy! Not suitable for children under 14 years.

€250.99*

24 hours dial, aluminium, arabic numerals, Ø 185 mm

White painted aluminum with printed numbers. 1 mm thick. Center hole Ø 10.5 mm.

€30.99*

3 in 1 car protective blanket

Protect your expensive car upholstery from dirt, liquids, animal hairs or, for example, when transporting garden waste etc. This protective blanket is a real all-rounder: whether it's on the rear seat or in the boot, this blanket adapts itself perfectly. Scratchproof. With seatbelt cut out for belting your dog up. Easy application. Can be stowed in a small space when not being used. Suddenly roll the carpet up in the car (suspended from the headrests). Universal size. Washable at 30°C. Suitable for: estate cars, hatchbacks, vans, limousines.

€32.99*

30-piece mini drill set, 2.35-mm shaft

Carbide drill set, 30 pcs., Shaft 2,35mm Each 2 pcs of 0,5mm - 2,3mm Length: 45 mm The shaft diameter of 2.35 mm guarantees very high concentricity and therefore optimal power transfer from chuck to drill bit. Suitable for use with metal, non-ferrous metals and plastics. Included with delivery: 2 pieces each: 0.5/0.6/0.7/0.8/0.9/1.0/1.1/1.2/1.3/1.4/1.5/1.6/1.8/2.0/2.3 mm. Comes in a plastic case.

€39.99*

3D Finishing Tool Kit 8W, USB powered

USB-operated, lighter and more effective soldering iron in a complete set for refining, repairing and finishing, especially for 3D prints. Advantages: • Fast heating in 15 seconds! (Comfortable touch control) • Quickly exchangeable attachments (no tools required!) • Easy handling thanks to USB operation (can also be connected to a power bank, for example our reference 346001) • Maximum temperature 480 ° C • Low consumption with 8 watts • Automatic sleep mode after 25 seconds of inactivity to save electricity and at the same time extend the life of the heating element • LED power indicator / power display • Handy size: Ø 19 x 163mm Delivered as a complete set with USB cable (approx. 1.5 m long), protective cap, bracket, solder wire and four different attachments or tips: - "Needle": comes in tight, inaccessible places as well as for the smallest holes - "Knife": for cutting and removing overhangs, support material (supports), rafts or brims - "Spoon": the scoop is ideal for removing bumps and residues in holes or recesses. Also suitable for smoothing surfaces. - "Standard": can be used for larger features and holes after printing

€34.99*

3D Kit Brandenburg Gate

The Brandenburg Gate, landmark and national symbol, is located in Berlin Mitte at the Pariser Platz. It was built between 1788 and 1791 in an early classic style. The gate once functioned as a tollgate into Berlin. There are many stories surrounding the quadriga. In divided Germany, the gate represented the border between East and West Berlin and as such Germany. The original is 26 m high, 65.5 m wide and 11 m deep. Additional information Number of parts: 21. Assembly time: approx. 100 to 160 min. Dimensions 7 x 3 x 6 cm.

€8.90* €13.90* (35.97% saved)

3D printer Carving Knife Set hardened steel blades

Sharp, precise, and practical. Ideal choice for 3D printed models and more. Widely use: 3 cutting tools with different blades. Can remove ABS and PLA rafts and can be used in a wide variety of other fields. Durable & Sharp: Made of quality constructed, long lasting hardened SK2 steel blade. Ideal Size: The PP handle is comfortable to grip with its ideal size and ergonomic shape.

€11.99*

3D Printer Form Finishing Tool Kit, big assortment

A basic combination to maintain and clean up 3D Models. It makes 3D printing easy and the printed results spectacular. Ideal for Hobbyists and Makers. Plastic Cutting Plier: • Clean and smooth cutting • Precisely cuts injection mold sprues gates and other plastics Long Nose Plier: • Clean and smooth cutting • Ideal for removing jammed filament from the extruder 3D Printer Carving Knife Set • Quality constructed, long lasting hardened steel blade. • 3 shapes for working on a variety of corners and curves Super Fine Tip Straight Tweezer • Stainless steel, non-magnetic • Ideal for removing excess filament from the extruder 3D Printer Palette Knife • 3" Stainless wide blade helps to remove prints without dropping • Clean and ensure the finer details are neatly finished, and more 8 Pcs Folding Hex Key Set • Content: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm • Material: SAE6150 Chrome vanadium steel • Case: T.P.R. Anti-slip • Key: Satin finish 3D Printer Nozzle Cleaning Drill Bit • 0.4mm drill for regular nozzle maintenance and de-clogging Long Handle Static Brush • Help the 3D printed objects to adhere better and to protect print bed from scratches Needle File Flat • Particularly useful for fine work or within restricted areas Modeler Sandpapr Set • Silicon carbide sandpaper, can be used dry or wet • Spec. #320, #500, #800, #1000 grid

€103.99*

3D Printer Palette Knives Stainless steel blades

DURABLE • ERGONOMIC • FLEXIBLE BLADE Durable, flexible and effective - An essential addition to your 3D printer tool kit. Remove your print safety without scratching build surface. Special features: • Hang-hole for easy storage • Ergonomic PP + TPR handle reduces hand fatigue • Sharpened cutting edges • Quality CR-V stainless steel, high hardness and long service life

€5.99*

3D Printer Tool Kit

A great start-up lit for a new printer owner to maintain and clean up 3D models. It contains pliers, hex key, tweezers, knife and other hand tools to make 3D printed results spectacular: An essential set for all 3D print professionals and hobbyists. Content: - Plastic cutting plier: Clean and smooth cutting. Precisely cuts injection mold sprues, gates and other plastic. - Long nose plier: Clean and mooth cutting. Ideal for removing jammed filament from the extruder. - 3D printer carving knife set: Quality construced, long lasting hardened steel blade. 3 shapes for working on a variety of corners and curves. - Super fine tip straight tweezer: Stainless steel, non-magnetic. Ideal for removing excess filament from the extruder. - 3D printer palette knife: 3" stainless wide blade helps to remove prints without dropping. Clean and ensure the finer details are neatly finished and more. - 8pcs folding hex key set: Ciontent: 1,5 - 2 - 2,5 - 3 - 4 - 56 and 8mm. Material: SAE6150 Chrome vanadium steel. Case antislip. Key satin finished. - 3D printer nozzle cleaning drill bit: 0,4mm drill for regular nozzle maintenance and de-clogging. - Long handle static brush: Help the 3D printed objects to adhere better and to protect print bed from scrateches - Needle file flat: Particularly useful for fine work or within restricted areas. - Modeler sandpaper set: Silicon carbide sandpaper can be used dry or wet. Spec. #320, #500, #800, #1000 grid.

€58.99*

3D-Hydro-Crystallack

Dieser spezielle Dickschichtlack kann in einem Arbeitsgang bis zu einer Schichtdicke von 1mm auf Papier, Karton, Glas, Keramik oder Holz mit Pinsel oder Spachtel aufgetragen werden und sorgt dabei für eine fantastische Tiefenwirkung. 3D-Hydro-Crystallack eignet sich auch hervorragend zum Aufkleben von Servietten auf Porzellan und auch zum Einbrennen im Backofen bei 130°C für 90 Minuten direkt nach dem Trocknen. Werkzeugreinigung erfolgt mit Wasser. ● Super 3D-Effekt ● Transparent aushärtend ● Speziell für Papiermosaik geeignet

€9.99*

3in1 crimping tool: crimping, cutting, stripping CAT5/6/7

• Parallel crimping action • Effortless • 3 in 1 cutting/stripping/crimping • Ergonomic design • Steel body • Handle lock • Extra precise for a clean cut • Compact and lightweight

€43.99*

3in1 water-saving shower, shower head Ø 110mm - saves energy

Save money and resources! With the 3in1 water-saving shower head, showering is twice as much fun! Thanks to the integrated water-saving function, you save a lot of water and energy. Sometimes gentle and relaxing, sometimes refreshing and revitalizing – 3 different shower programs can be selected with the rotary switch choose. Every setting promises an incomparable pampering experience, just like on a wellness holiday! Suitable for all standard shower hoses. Also suitable for instantaneous water heaters. Extra large shower head: Ø 110 mm. Material: ABS chrome plated; Nozzles: TPR. 5 year guarantee. How to save: Economy shower heads usually only need half the water compared to ordinary shower heads. You don't have to make any compromises when it comes to cleaning performance. You don't have to do without the comfort you are used to, because the water jet is scattered by the supply of air. That means: Although less water flows, you will not notice any difference. The functionality is therefore very similar to that of water-saving aerators. Also: the smaller the jet angle, the less water splashes to the side without being used. For you this means: the best body care, the same comfort at significantly lower costs.

€34.99*